Shenzhen Jaguar Automation Equipment Co.,Ltd.
Shenzhen Jaguar Automation Equipment Co.,Ltd.
Add to Cart
INTRODUCTION:
1.Efficient, energy-saving, lead-free, environment-friendly, safe and brand-new design, simple
2.Automatic power system, frequency converter control, automatic board input system.
3.Flux sprays system using scanning spray nozzle, Japanese nozzles and rodless pneumatic cylinders and PLC control, accurate and reliable.
4.Preheating system uses three independent temperature control so that ensure the excellent heat preservation, temperature uniformity, temperature difference no more than±2ºC.
5.Special alloy transportation chain claws, non-stick tin and ensures the quality of weldingPCB board.
6.Tin stove adopts imported high frequency conversion motor independent control
7.Lead-free solder furnace with independent design, environmental protection and safety,easy to clean.
8.Tin stove preheating furnace uses high-speed PID and 2 independent infrared heating (IR2heating) control.
9.Time can be controlled, we can preset switch functions, tin stove can heat within 90 minutes.
10.With black box memory function, the machine can always store the production management records, improve work efficiency.
11.Automatic claw cleaning function ensure the cleanliness of claws.
12.Reasonable design and sensitive fault security alarm system ensure the stable performance and operators’ safety.
13.Nitrogen Structure(optional): High accuracy Oxygen analyzer, Nitrogen consumption of 16m3/hr based on 300-500ppm.
Specification:
| Model No. | JAGUAR N450 |
| Number of heating zones | 3 |
| Length of heating zones | 1800mm |
| Total/running power | 30KW/8-11KW |
| Air supply | 0.5MPa |
| Preheating method | Micro hot air |
| Preheating power | 220V 8KW |
| Control method | PC +PLC |
| Range of temp. control | Room temperature---300ºC |
| Preheating time | About 10-15mins for setting 150ºC |
| Solder type | Lead-free / Sn-Pb |
| Solder pot capacity | 400KG |
| Solder pot temperature | 300ºC |
| Solder pot material | Pure titanium(standard) |
| Heating emitter power | 380V 8KW |
| Solder temp. control method | PID+SSR |
| Wave crest drive power | 1KW 220V |
| Wave crest height Control | Frequency converter |
| Warm-up time of solder | About 180mins for setting 250ºC |
| PCB width | 60-450mm |
| Component clearance | Top 120mm(option 160mm) Bottom15mm |
| Convey speed | 0-2000mm/min |
| Convey height | 750+/-20mm |
| Convey direction | L→R (R→L optional) |
| Convey angle | 4-7 º |
| Convey width adjustment | Manual |
| UPS | Option |
| Nitrogen structure | Option |
| Flux pressure/capacity | 3-5 bar/6.5L |
| Weight | 1100KG |
| Power Requirement | 3P5W,380/220V 50Hz 63A |
| Dimensions | 4300(L)*1400(W)*1560(H) |